Solrif in-roof photovoltaic mounting system
Solrif® is a patented in-roof photovoltaic mounting system developed by Ernst Schweizer AG, a pioneer in solar technology. It converts frameless standard PV modules into functional solar roof elements, replacing conventional roof tiles on pitched roofs. This creates a fully integrated solar roof that generates renewable energy while contributing to a reduction in CO₂ emissions.
The Solrif® system offers a high degree of design flexibility and can be seamlessly integrated into both new builds and renovation projects, including architecturally sensitive or heritage buildings. In collaboration with leading European module manufacturers, Solrif® is continuously developed to ensure high performance, long-term reliability and consistent quality.
The Solrif in-roof system is compatible with a wide range of PV modules from established European manufacturers, providing versatile solutions for a variety of architectural and technical requirements.
Solrif flat-head screw | DIN 1160 2.5 x 25 mm | Accessory 03748
The Solrif wide-head screw DIN 1160 – manufacturer’s part number 03748 – is an original fastener for the Solrif in-roof photovoltaic system from Ernst Schweizer.Further informationThe wide-head nail is used in combination with the Solrif sheet metal clip and serves to securely fix the system sheets to the roof substructure.The large head of the nail ensures reliable fixing of the sheet metal clips. The ZnNi-coated steel surface also ensures high corrosion resistance and a long service life in outdoor applications.Product descriptionThe Solrif wide-head pin DIN1160 2.5 x 25 mm is a component of the original fastening system for the Solrif in-roof system. It is used to permanently connect the Solrif sheet metal fasteners to the roof battens or the substructure.In combination with the Solrif sheet metal anchors, this creates a stable fastening for the perimeter system sheets. This ensures that the photovoltaic modules are permanently and securely integrated into the roof.The wide-head pin complies with the DIN 1160 standard and features a large head that enables secure fastening whilst preventing slippage.According to the Solrif installation instructions, the wide-head pins are used to secure sheet metal fasteners, which in turn fix the side, corner and ridge sheets within the system.Technical dataProduct: Solrif accessory – wide-head pinManufacturer: Ernst Schweizer AGManufacturer’s item number: 03748Standard: DIN 1160Diameter: 2.5 mmLength: 25 mmMaterial: SteelCoating: ZnNi-coatedWeight: 0.0011 kgSystem compatibility: Solrif in-roof systemApplicationThe Solrif wide-head pin is used during the installation of the Solrif in-roof system. It is used to secure the sheet metal clips, which in turn firmly connect the surrounding system sheets to the roof structure.Typical applications:Fastening of Solrif sheet metal bracketsFixing of side sheetsFixing ridge sheetsFixing corner sheetsInstallation of Solrif in-roof photovoltaic systemsAdvantages of the Solrif wide-head screwOriginal accessories for the Solrif in-roof systemCompliant with DIN 1160Large head for secure fasteningHigh corrosion resistance thanks to ZnNi coatingQuick and easy to installPerfect compatibility with Solrif sheet metal fastenersSystem compatibilityThe wide-head pin is used specifically in the Solrif in-roof system from Ernst Schweizer and is part of the original system installation.It is used in combination with the following components:Solrif sheet metal fastenersSolrif side flashingsSolrif corner flashingsSolrif ridge sheetsFAQ – Frequently asked questions about the Solrif wide-head pinWhat are Solrif wide-head pins used for?The wide-head pin is used to secure the Solrif sheet clips. These fix the perimeter system sheets of the Solrif integrated roofing system to the roof substructure.What are the dimensions of the Solrif wide-head pin?The wide-head pin complies with the DIN 1160 standard and has a diameter of 2.5 mm and a length of 25 mm.Is the wide-head pin corrosion-resistant?Yes. The pin is made of steel with a ZnNi coating, which ensures a high level of corrosion protection for outdoor use.Which components is the broad-head pin used with?The wide-head pin is used in conjunction with Solrif sheet metal fasteners, which secure the system sheets of a Solrif in-roof module array.
Solrif | Accessories | Chipboard screw
Pan head A2, T20 hex socket, pack of 200. Screw suitable for use in the Solrif system on roof battens.
Solrif Sheet Metal 05483 | Solrif Accessories
The Solrif® sheet metal clip – manufacturer’s part number 05483 – is an original fastening element for the Solrif® in-roof photovoltaic system from Ernst Schweizer. The sheet metal clip is used to securely fix the perimeter system sheets in place and ensures a permanently stable and wind-resistant installation of the Solrif system components.Further informationManufactured from high-quality EN AW-6063 T66 aluminium, the Solrif sheet metal fastener offers high corrosion resistance and a long service life in outdoor applications. It is installed in accordance with the installation instructions in conjunction with a broad-head pin and reliably secures the side, corner and ridge sheets of the Solrif system to the roof substructure.Product descriptionThe Solrif sheet metal clip 05483 is a small but crucial accessory within the Solrif in-roof system. It ensures that the surrounding connection and cover sheets are securely connected to the roof structure.Thanks to its precise shape, the sheet metal clip can be easily inserted into the designated areas and then secured with a broad-head pin. This creates a stable mechanical connection between the roof substructure and the sheet metal components of the Solrif system.During system installation, several sheet metal fasteners are fitted around the module array:2 sheet metal fasteners per side sheet3 sheet metal fasteners per ridge sheet1 sheet metal bracket per corner sheetPositioning is carried out in accordance with the installation instructions for the Solrif System by Ernst Schweizer. This ensures safe load transfer and the long-term stable integration of the photovoltaic modules into the roof surface.Technical dataProduct: Solrif accessories – sheet metal bracketsManufacturer: Ernst Schweizer AGManufacturer’s item number: 05483Material: Aluminium EN AW-6063 T66Width: 20 mmHeight: 10 mmLength: 37 mmWeight: 0.003 kgPackaging unit: 100 piecesSystem: Solrif in-roof photovoltaic systemApplicationThe Solrif sheet clip is used within the Solrif in-roof system to secure the system sheets. It is an integral part of professional installation in accordance with Ernst Schweizer’s system specifications.Typical applications include:Fixing of side sheetsFixing of corner sheetsFixing ridge sheetsInstallation of Solrif module arraysIntegration of photovoltaic modules as an in-roof solutionAdvantages of Solrif sheet metalOriginal Solrif system accessoriesHigh corrosion resistance thanks to aluminiumQuick and easy installationSeamless integration into the Solrif systemLong service lifeSecure fixing of the system panelsCompatibilityThe sheet metal panel is compatible with all Solrif in-roof system components and is used in combination with the corresponding system sheets and fixing elements.It forms part of the original system solution for roof-integrated photovoltaic systems.FAQ – Frequently asked questions about the Solrif sheet metal bracketWhat is the Solrif sheet metal bracket used for?The sheet metal bracket is used to secure the perimeter system sheets in the Solrif in-roof system. It ensures that side, corner and ridge sheets are securely connected to the roof substructure.How many sheet metal fasteners are required per module field?According to the installation instructions, two sheet metal fasteners are typically used per side sheet, three per ridge sheet and one per corner sheet.What material is the Solrif sheet metal fastener made of?The sheet metal fastener is made of aluminium EN AW-6063 T66, making it particularly corrosion-resistant and durable.Is the sheet metal fastener an original Solrif accessory?Yes. It is an original accessory for the Solrif in-roof system from Ernst Schweizer.
Solrif | Accessories | Profile-shaped
Discontinued item. This was required to secure the old Solrif eaves profile. The new SRIF-ES-23105 eaves profile can be secured without the profile clips.
Solrif top mounting bracket | Solrif D | Standard | Item no. 05655
The Solrif top mounting bracket (item no. 05655) is a mounting solution for the Solrif in-roof photovoltaic mounting system and ensures that Solrif D modules are securely fixed at the top of the module array.More informationProduct detailsSuitable for Solrif D modulesPosition: topDesign: StandardMaterial: stainless spring steelInstallation: screwlessItem number: 05655ApplicationThe mounting bracket is used for flat sheet metal connections and serves to securely fasten modules in the Solrif photovoltaic in-roof mounting system. It ensures reliable fixation even under increased wind and snow loads.AdvantagesQuick and easy installation without screwsHigh corrosion resistanceOptimised for Solrif D modulesSeamless integration into the Solrif systemPlanning notesThe number of mounting brackets required varies depending on the roof structure and wind and snow loads. For an optimal design, we recommend individual planning.Frequently asked questions (FAQ)Where is the mounting bracket installed at the top?The mounting bracket is installed in the upper section of the module array, particularly where there are flat sheet metal connections within the Solrif system.Is the mounting bracket suitable for all Solrif modules?This model is specifically designed for Solrif D modules. Appropriate brackets are required for other frame variants.Are screws required for installation?No, the mounting bracket can be fitted without additional screws, which makes installation much easier.
Solrif N Top Mounting Bracket for Flat Sheet Metal Connections | 33954 | Standard
The Solrif top mounting bracket (item no. 33954) is a specially developed mounting solution for the Solrif in-roof photovoltaic mounting system. It is suitable for Solrif N modules with a frame height of 17 mm and is used in particular with flat sheet metal connections.The mounting bracket ensures that the modules are securely fixed in the upper section of the module array – even under high wind and snow loads. Made from stainless spring steel, it is particularly durable and corrosion-resistant.Thanks to its well-thought-out design, the mounting bracket can be installed without additional screws. This saves time on site and significantly simplifies installation within the Solrif system.More informationProduct detailsSuitable for Solrif N modules (17 mm frame height)Position: topVersion: StandardMaterial: stainless spring steelInstallation: screwlessItem number: 33954ApplicationThe mounting bracket is used when integrating modules into the Solrif photovoltaic in-roof mounting system, particularly for roof connections with flat sheets.AdvantagesQuick and easy installationNo additional screws requiredHigh corrosion resistancePerfectly matched to the Solrif systemPlanning notesThe number of mounting brackets required depends on the roof structure as well as wind and snow loads. For an optimal design, we recommend individual planning.
Solrif throat seal strip | Item no. 06736
The Solrif throat sealing strip (item no. 06736) is used to seal the lower section of the module array and reliably prevents small animals from entering the Solrif in-roof system.More informationProduct detailsProduct: Solrif valley sealing stripManufacturer’s item number: 06736Width: 30 mmHeight: 40 mmLength: 1000 mmMaterial: Foam / Sealing materialSystem: Solrif in-roof photovoltaicDescriptionThe Solrif valley sealing strip is a functional accessory for the Solrif in-roof system and is installed at the bottom of the module surface. It reliably seals the structure and prevents the ingress of small animals, dirt or leaves.The valley sealing strip is a particularly important component for professional installation, especially in systems without an eaves profile. It adapts flexibly to the existing roof structure and ensures a clean and secure seal.AdvantagesReliable protection against small animals and dirtIdeal complement to Solrif in-roof systemsFlexibly adaptable to roof and module geometriesQuick and easy installationImproves the system’s longevityApplicationThe valley sealing strip is installed in the lower section of the Solrif module surface and seals any gaps between the roof and the modules. It is particularly useful for system installations without an eaves profile.Typical applications:Sealing in the eaves areaProtection against small animals and leavesSupplement where an eaves profile is missingFrequently asked questions (FAQ)What is the valley sealing strip used for?It seals the lower part of the module surface and prevents small animals, dirt and leaves from entering.Is the valley sealing strip absolutely essential?It is particularly important for proper sealing in installations without an eaves profile and should be included in the planning.Can the sealing strip be adjusted?Yes, the material is flexible and can be cut to size or adjusted as required.
Solrif mounting bracket profile | Solrif N | Standard | Black | Item no. 06497
The Solrif mounting bracket (item no. 06497) is a specially designed mounting solution for the Solrif in-roof photovoltaic mounting system. It is used in the aluminium profile section and ensures a secure and flexible mounting of Solrif N modules with a frame height of 17 mm.More informationProduct detailsThe mounting bracket enables stable, slightly floating mounting of the modules and helps to compensate for stresses within the system. This ensures a durable and secure installation even under changing weather conditions.Manufactured from stainless spring steel and finished with a black coating, the mounting bracket offers excellent corrosion resistance and blends seamlessly into the Solrif system.Suitable for Solrif N modules (17 mm frame height)Position: Profile areaVersion: StandardColour: BlackMaterial: stainless spring steelItem number: 06497ApplicationThe mounting bracket profile is used as part of the installation in the Solrif photovoltaic in-roof mounting system and serves to securely fix the modules in the profile area.AdvantagesOptimal force distribution within the systemHigh corrosion resistanceDurable and low-maintenancePerfectly matched to the Solrif systemPlanning notesThe number of mounting brackets required varies depending on the roof structure and wind and snow loads. For an optimal design, we recommend individual planning.
Solrif | Accessories | Earthing cable set, 1.8 m, 6 mm²
The Solrif earthing cable set (1.8 m | 6 mm²) is an easy-to-install, complete solution for the standard-compliant earthing of Solrif® PV modules and ensures a permanently secure electrical connection within the Solrif® in-roof system.Product description & technical detailsProduct descriptionThe pre-assembled earthing cable set enables quick and safe connection of Solrif® modules to the photovoltaic system’s earthing system. The flexible earthing strand with a 6 mm² conductor cross-section ensures reliable dissipation of electrical currents and supports the standard-compliant installation of in-roof PV systems.Scope of deliveryGrounding strand 6 mm², length 1.8 m2 × cable lugs2 × hexagon head screws (13 mm)2 × washersTechnical dataLength: 1.8 mConductor cross-section: 6 mm²Manufacturer’s item number: 23751Application & BenefitsSpecially developed for the earthing of Solrif® PV modulesEasy-to-install alternative to the earthing terminal (item no. 21899)Reliable electrical contact thanks to fan-shaped washersIdeal for professional in-roof photovoltaic systems
Solrif mounting bracket profile | Solrif D | Standard | Black | Item no. 05653
The Solrif mounting bracket (item no. 05653) is a specially developed mounting solution for the Solrif in-roof photovoltaic mounting system. It is used in the aluminium profile section and is optimally designed for Solrif D modules.More informationProduct detailsThe mounting bracket ensures a secure and slightly floating mounting of the modules. This allows stresses within the system to be balanced, which increases the longevity of the entire photovoltaic system – even under varying wind and snow loads.Manufactured from stainless spring steel and finished with a black coating, the mounting bracket offers high corrosion resistance and blends seamlessly into the Solrif system.Suitable for Solrif D modulesPosition: Profile areaVersion: StandardColour: BlackMaterial: stainless spring steelItem number: 05653ApplicationThe mounting bracket profile is used as part of the installation in the Solrif photovoltaic in-roof mounting system and serves to securely fix the modules in the profile area.AdvantagesOptimal force distribution within the systemHigh corrosion resistanceDurable and low-maintenancePerfectly matched to the Solrif systemPlanning notesThe number of mounting brackets required depends on the roof structure as well as wind and snow loads. For an optimal design, we recommend individual planning.
Solrif N Glass Mounting Bracket | Standard | Black | 52010
The Solrif N Standard Glass Mounting Bracket in black (Item No. 52010) is an original mounting component for the Solrif in-roof system, ensuring a secure and gentle fixation within the glass area of photovoltaic modules.More informationProduct detailsSuitable for the Solrif N in-roof systemApplication: Glass area (module glass edge)Manufacturer’s item number: 52010Material: stainless spring steelSurface: black coatedWith rubber coating to protect the module glass edgeDescriptionThe Solrif Standard Glass Mounting Bracket has been specially developed for securing the exposed edge of the module glass in the Solrif in-roof system. It holds the photovoltaic module securely in the system whilst ensuring tension-free support.Thanks to the integrated rubber coating, the sensitive glass edge is reliably protected. The construction from stainless spring steel ensures a durable, corrosion-resistant and stable mounting – even in changing weather conditions.AdvantagesGentle fixing thanks to rubber coatingSecure and tension-free module fasteningCorrosion-resistant spring steelQuick and easy installationTechnical dataWidth: 17 mmHeight: 37 mmLength: 104 mmWeight: approx. 0.05 kgMaterial: stainless spring steelCoating: blackApplicationThe mounting bracket is installed at the free edge of the module glass and securely fixes the module in the Solrif in-roof system. It ensures even load distribution and supports the long-term stability of the photovoltaic system.Frequently Asked Questions (FAQ)What is the Solrif glass mounting bracket used for?The mounting bracket is used to secure the free edge of the module glass and holds the photovoltaic module securely in the Solrif in-roof system.Why is the mounting bracket rubberised?The rubber coating protects the module’s delicate glass surface from damage and ensures gentle fastening.Which system is the mounting bracket suitable for?The Standard Glass Mounting Bracket is specifically designed for the Solrif N in-roof system.
Solrif earthing terminal | Earthing connector | Item number 21899
The Solrif earthing terminal / earthing connector (item no. 21899) enables safe equipotential bonding within the Solrif in-roof system and ensures that the PV system is earthed in accordance with standards.More informationProduct detailsProduct: Solrif earthing terminal / earthing connectorManufacturer’s item number: 21899Cable cross-section: up to max. 10 mm²Material: Stainless steel / InoxDimensions: 16 x 16 x 25 mmApplication: equipotential bonding / earthingSystem: Solrif in-roof photovoltaicDescriptionThe Solrif earthing terminal is an essential connecting element for the professional earthing of photovoltaic systems in the Solrif in-roof system. It is screwed directly into the module frame and establishes a secure connection to the earthing cable.Thanks to its robust stainless steel (Inox) construction, the terminal ensures a permanently corrosion-resistant and reliable electrical connection – even under demanding weather conditions.AdvantagesStandard-compliant equipotential bonding in the PV systemSuitable for cable cross-sections up to 10 mm²Corrosion-resistant thanks to stainless steel constructionQuick and secure installation in the Solrif frameReliable electrical connection throughout the entire service lifeApplication & InstallationThe earth terminal is screwed into the Solrif module frame and connected to the earth cable. Ensure that the cables are correctly stripped and securely fixed in the terminal.Important notes:Do not carry out earthing until the module mounting has been installedDo not route the cable between the module and the mounting bracketRoute the cable outside the bracketsEnsure a secure fit and good contactFrequently Asked Questions (FAQ)What is the earthing terminal used for?It establishes equipotential bonding between the PV modules and earth, ensuring the electrical safety of the system.Which cables can be used?The terminal is suitable for cables with a cross-section of up to 10 mm².Is the earthing terminal weather-resistant?Yes, thanks to its stainless steel construction, it is corrosion-resistant and suitable for long-term outdoor use.
Solrif Glass Mounting Bracket | Solrif D | Standard | Item No. 05654
The Solrif glass mounting bracket (item no. 05654) has been specially developed for the delicate glass section of Solrif D modules and ensures secure, material-friendly fixing within the Solrif in-roof photovoltaic mounting system.More informationProduct detailsSuitable for Solrif D modulesPosition: Glass areaVersion: StandardMaterial: stainless spring steel with rubber coatingGentle fixing of delicate glass surfacesInstallation: screwlessItem number: 05654ApplicationThe glass mounting bracket is used specifically for sensitive module surfaces. The integrated rubber coating reliably protects the glass surface whilst ensuring secure fixing within the Solrif system – even under varying wind and snow loads.AdvantagesProtection of sensitive glass surfaces through rubber coatingSecure and even load distributionCorrosion-resistant spring steelQuick and easy installation without screwsPlanning notesThe number of mounting brackets required depends on the roof structure as well as wind and snow loads. For optimal planning, we recommend a customised design.Frequently asked questions (FAQ)Why is the mounting bracket rubberised?The rubber coating protects the sensitive glass surface of the modules and prevents damage during installation and operation.Which modules is the bracket suitable for?The mounting bracket is specially designed for Solrif D modules and is optimally tailored to their requirements.Is screw fixing necessary?No, the mounting bracket is installed without additional screws, enabling quick installation.
Solrif | Edge connection profile | Left | Solrif N | Module height: 432 mm
Edge profile for the left-hand side transition on the module array in the cladding system. Made to measure for modules with a height of 0.Solrif Edge Connection Profile Left – Solrif N | Module height 432 mmThe Solrif edge connection profile (left) is a high-quality aluminium profile for the secure and durable integration of photovoltaic modules into the Solrif in-roof system. It is suitable for Solrif N modules with a module height of 432 mm and supports laminate thicknesses of up to 5.2 mm. Thanks to its precise workmanship and powder-coated finish in RAL 9005 (black), it provides a visually appealing yet robust solution for roof integration.Key featuresPrecisely fitting connection profile for Solrif N modulesPosition: leftModule height: 432 mmFor laminate thicknesses up to max. 5.2 mmMaterial: Aluminium EN AW6063 T66Surface: black, powder-coated (RAL 9005)Ensures a tight and durable integration into the in-roof systemTechnical dataWidth: 35 mmHeight: 25 mmLength: 400 – 1199 mmMaterial: Aluminium EN AW6063 T66Colour: RAL 9005 (black)ApplicationThe Solrif left-hand edge connection profile is installed on the left-hand edge of the module row. It ensures a tight, secure and visually clean finish when installing in-roof photovoltaic systems using the Solrif system. Ideal for new builds and refurbishments, in combination with suitable Solrif components.
Solrif | Edge connection profile | Left | Solrif N | Module height: 435 mm
Edge profile for the left-hand side transition on the module array in the SOLRIF N system, for cladding. Made to measure for modules with a height of 435 mm.Solrif Edge Connection Profile (Left) – Solrif N | Module height 435 mmThe Solrif edge connection profile (left) is a precision-manufactured aluminium profile for the secure and visually appealing integration of photovoltaic modules into the Solrif in-roof system. It is specifically designed for Solrif N modules with a module height of 435 mm and supports laminate thicknesses of up to 5.2 mm. Thanks to its high-quality construction and black coating in accordance with RAL 9005, it ensures long-lasting stability and a clean roof appearance.Key featuresPrecisely fitting connection profile for Solrif N modulesPosition: leftModule height: 435 mmSuitable for laminate thicknesses up to 5.2 mmMaterial: Aluminium EN AW6063 T66Surface: black, powder-coated (RAL 9005)Ensures tight, stable and durable finishes in the in-roof systemTechnical dataWidth: 35 mmHeight: 25 mmLength: 435 mmMaterial: Aluminium EN AW6063 T66Colour: RAL 9005 (black)Laminate thickness: up to 5.2 mmApplicationThe Solrif edge connection profile (left) is installed on the left edge of the module surface and ensures a tight and secure integration of the photovoltaic modules into the roof. It provides a clean visual finish as well as the necessary stability and is suitable for both new builds and renovations as part of the Solrif in-roof system.
Solrif | Edge connection profile | Right | Solrif N | Module height: 432 mm
Edge profile for the right-hand side transition on the module array in the cladding system. Made to measure for modules with a height of 0.
Solrif | Edge connection profile | Right | Solrif N | Module height: 435 mm
Edge profile for the right-hand side transition on the module array in the SOLRIF N system, for cladding. Made to measure for modules with a height of 435 mm.Solrif Edge Connection Profile (Right) – Solrif N | Module height 435 mmThe Solrif edge connection profile (right) is a precision-manufactured aluminium profile for the secure and visually clean integration of photovoltaic modules into the Solrif in-roof system. It has been specially developed for Solrif N modules with a module height of 435 mm. The profiles are suitable for laminate thicknesses of up to 5.2 mm and are powder-coated in black to RAL 9005. They thus offer maximum stability, durability and a visually appealing solution for roof integration.Key featuresEdge connection profile for Solrif N modulesPosition: rightModule height: 435 mmFor laminate thicknesses up to max. 5.2 mmMaterial: Aluminium EN AW6063 T66Surface: black, powder-coated (RAL 9005)Ensures stable, tight and durable finishes in the in-roof systemTechnical dataWidth: 35 mmHeight: 25 mmLength: 435 mm (corresponds to module height)Material: Aluminium EN AW6063 T66Colour: RAL 9005 (black)Laminate thickness: up to 5.2 mmApplicationThe Solrif right-hand edge connection profile is installed on the right-hand edge of the module surface. It ensures a reliable seal and a neat visual finish for the PV system. Thanks to its length, which corresponds exactly to the module height of 435 mm, it offers a perfect fit for Solrif N systems – ideal for new builds and refurbishments.
Solrif | Edge connection profile | Left | Solrif D | Module height: 435 mm
Edge profile for the left-hand side transition on the module array in the SOLRIF D system, for cladding. Made to measure for modules with a height of 25.
Solrif | Edge connection profile | Left | Solrif N | Module height: 554 mm
Edge profile for the left-hand side transition on the module array in the SOLRIF N system, for cladding. Made to measure for modules with a height of 554 mm.
Solrif | Edge connection profile | Right | Solrif N | Module height: 554 mm
Edge profile for the right-hand side transition on the module array in the SOLRIF N system for cladding. Made to measure for modules with a height of 554 mm.Solrif Edge Connection Profile (Right) – Solrif N | Module height 554 mmThe Solrif edge connection profile (right) is a high-quality aluminium profile for the secure, durable and aesthetically pleasing integration of photovoltaic modules into the Solrif in-roof system. It is designed for Solrif N modules with a module height of 554 mm. The length of the profile corresponds exactly to the module height. Suitable for laminate thicknesses of up to 5.2 mm, the robust design in EN AW6063 T66 aluminium with a black powder coating to RAL 9005 ensures reliable roof integration and a clean appearance.Key featuresEdge connection profile for Solrif N modulesPosition: rightModule height & length: 554 mmSuitable for laminate thicknesses up to max. 5.2 mmMaterial: Aluminium EN AW6063 T66Surface: black, powder-coated (RAL 9005)Ensures tight, stable and durable finishes in the in-roof systemTechnical dataWidth: 35 mmHeight: 25 mmLength: 554 mm (corresponds to module height)Material: Aluminium EN AW6063 T66Colour: RAL 9005 (black)Laminate thickness: up to 5.2 mmApplicationThe Solrif right-hand edge connection profile is installed on the right-hand edge of the module row. It ensures a reliable seal and a neat visual finish for the photovoltaic system. With a length of 554 mm, which corresponds exactly to the module height, it offers a perfect fit for Solrif N systems and is suitable for both new-build projects and refurbishments.
Solrif | Edge connection profile | Right | Solrif D | Module height: 435 mm
Edge profile for the right-hand side transition on the module array in the SOLRIF D system, for cladding. Made to measure for modules with a height of 25.
Solrif | Edge connection profile | Left | Solrif D | Module height: 554 mm
Edge profile for the left-hand side transition on the module array in the SOLRIF D system, for cladding. Made to measure for modules with a height of 25.
Solrif flashing 21522 | Connection plate for Solrif in-roof system
The Solrif flashing 21522 is a connecting plate for the Solrif in-roof photovoltaic mounting system and ensures a neat, watertight transition at the ridge.More informationProduct detailsProduct: Solrif flashingManufacturer’s item number: 21522Material: Aluminium EN AW-6063 T66Colour: blackWidth: 133 mmHeight: 23 mmLength: 342 mmWeight: approx. 0.146 kgDescriptionThe Solrif flashing is a universal connection plate for the Solrif system. It is installed on the ridge side of the module array between two ridge plates, where it serves as a functional transition.The flashing ensures a clean and watertight connection to the adjacent roof covering. It thus contributes to a permanently secure and visually uniform finish in the area of the sheet metal edging.AdvantagesSuitable for the Solrif photovoltaic in-roof mounting systemClean transition between two ridge sheetsSturdy and durable aluminium constructionWeather-resistant surface in blackApplicationThe joint plate is installed in the upper section of the module array and functionally connects two ridge plates. It is used wherever a clean transition within the sheet metal frame is required.For Solrif full-roof systems without adjacent tiles, this connecting plate is not usually required.Frequently Asked Questions (FAQ)What is the Solrif joint plate used for?The joint plate is installed on the ridge side of the module array between two ridge plates, ensuring a clean transition within the sheet metal frame.What material is the joint plate made of?The Solrif joint plate is made of aluminium EN AW-6063 T66, making it durable, sturdy and weather-resistant.Is the flashing required for every Solrif roof?No, for Solrif full roofs without adjacent tiles, the butt plate is generally not required.
Solrif | Edge connection profile | Right | Solrif D | Module height: 554 mm
Edge profile for the right-hand side transition on the module array in the SOLRIF D system, for cladding. Made to measure for modules with a height of 25.